Jump to content

  • Welcome!

    Register and log in easily with Twitter or Google accounts!

    Or simply create a new Huddle account. 

    Members receive fewer ads , access our dark theme, and the ability to join the discussion!

     

Any plumbers?

Hawk

By Hawk,
in Huddle Lounge

Recommended Posts

Hawk Newbie

Hawk

Posted
Posted

not a handy guy by any means...so I need some help!

have a leaking bathtub spout. It's a single faucet bath/shower unit. When you pull the handle up on the tub spout to send the water up to the shower head, I'm getting water leaking out of the wall end of the tub spout. I've pulled it off a couple of times now, the rings all look good. Its not one of the screw on types, but rather one that has a plastic piece that pushes onto the copper pipe and then the spout pushes onto that and is set with a set screw. Any ideas?

Also, I have a leaky shut off valve under the kitchen sink for the dishwasher. It's a cheap metal valve that seems to have a crack in it maybe that was previously repaired with some putty or something?? Tightened the fittings, but it still slowly drips.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • PMH4OWPW7JD2TDGWZKTOYL2T3E.jpg

  • Topics

  • Posts

    • jessicasmith0
      Does JetBlue have free cancellation?

      By jessicasmith0 · Posted

      https://support.google.com/assistant/thread/311339676?hl=en&sjid=11489775381582229063-AP https://support.google.com/assistant/thread/311339676?hl=en&sjid=11489775381582229063-AP https://support.google.com/assistant/thread/311339676?hl=en&sjid=11489775381582229063-AP https://support.google.com/assistant/thread/311339676?hl=en&sjid=11489775381582229063-AP https://support.google.com/assistant/thread/311339676?hl=en&sjid=11489775381582229063-AP https://support.google.com/assistant/thread/311339676?hl=en&sjid=11489775381582229063-AP
    • tukafan21
      Mason Graham Bandwagon

      By tukafan21 · Posted

      When we drafted Luke, we already had Cam, Smith, Olsen, Stewart, Deangleo, Gross, Kalil, CJ, Hardy, Beason, TD, Gamble (and maybe more I'm forgetting), we had a lot of great pieces in place. Going pure BPA for a player with Luke's potential when the LB you already have is different when you already have all those pieces in place.  Our OL right now is probably in a better shape than that team and our RBs and TE have potential compared to proven vets back then, but after that, the 2012 roster was in a far better shape than we are right now. We need a #1 WR, DEs, LBs, DBs, C, and depending who you ask a QB.  Going BPA at pick #5 when that player is a DT and your current best player on either side of the ball is a DT, seems irresponsible. If he's the only player they like that high left, then you trade back and go with position of more need at a slot that makes sense for the player while adding other picks.  If you trade back and he falls because other teams don't need/want a DT, then you consider him at that point because of the value.    
    • Carolina Mike
      Mason Graham Bandwagon

      By Carolina Mike · Posted

      This sounds like the same back and forth when we drafted a LB when we already had a LB or as mentioned prior back to back DLs. I want the BPA, if it is another DT so be it. (No not a kicker/punter for those people that think they are funny))
×
×
  • Create New...